Figure 5-8: secure easy setup is complete – Linksys WUSB54G User Manual

Page 35

Chapter 5: Using the Wireless Network Monitor
Secure Easy Setup

Wireless-G USB Network Adapter

NOTE: You can only add one Secure Easy Setup device at a time.

Figure 5-8: Secure Easy Setup is Complete

2. Press the Cisco logo or Secure Easy Setup button on the wireless router or access point. When it turns white

and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on
the wireless router or access point when the Adapter has been successfully added to the network. Repeat
this procedure for any additional Secure Easy Setup device.

3. Secure Easy Setup is now complete and a configuration profile will has been created automatically. You may

save your configuration profile to a text file by clicking the Save button, or print the configuration by clicking
the Print button. Click Connect to Network to connect to your network.

Congratulations! Secure Easy Setup is complete.