Lathem 1000E - Manual (Page 7)

5
SETTING THE DISPLAY FORMAT
SETTING THE TIME
Example: Change the time from 10:08 to 10:09.
Press the SELECT button and position
the " " mark at the "TIME".
At that moment, the "Hour" flashes. (The
flashing means it can be changed.)
Change the "Hour".
In case of the example, press the SET
button because the hour is not to be
changed.
At that moment, the flashing changes
from "Hour" to "Minute".
S
tep
1
TIME
SELECT CHANGE SET
Change the "Minute".
Press the CHANGE button to set at "09",
and then press the SET button.
At that moment, the "Second" starts to
run from "00".
S
tep
2
TIME
SELECT CHANGE SET
SELECT CHANGE SET
TIME
After you finish setting the time, press
the SET button once again.
Now the time setting has been
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print.
S
tep
3
TU WE TH FR SA SU MO
Second
Hour Minute