Linksys SPA901 - Manual (Page 2)

SPA901
Model No.
PRODUCT DATA
• One Service Provider Line
• Two Call Appearances Accessed Via Flash Key or Hook-Flash
• Shared Line Appearance **
• Line Status Indicator
• Call Hold
• Music on Hold **
• Call Waiting
• Outbound Caller ID Blocking
• Call Transfer - Attended and Blind
• Three Way Conferencing with Local Mixing
• Multi-Party Call Conferencing via External Conference Bridge **
• Call Pick Up - Selective and Group **
• Call Park and UnPark **
• Call Back on Busy
• Call Blocking - Anonymous and Selective
• Call Forwarding - Unconditional, No Answer, On Busy
• Call Return - Redial Last Caller
• Hot Line and Warm Line Automatic Calling
• Call Logs (60 entries each): Made, Answered, and Missed Calls. Accessed via HTTP Server.
• Redial Last Called Number
• Do Not Disturb (callers hear line busy tone)
• Block Anonymous Incoming Calls
• URI (IP) Dialing Support (Vanity Numbers)
• Built-in Web Server for Administration and Configuration, with User and Admin Access Levels
• Built-in Interactive Voice Response system to check status and change configuration
• Date and Time with Intelligent Daylight Savings Support
• Call Start Time Stored in Call Logs
• Distinctive Ringing
• Ten User Downloadable Ring Tones - Ring Tone Generator Free from www.linksys.com
• Speed Dial (8 entries)
• Group Paging (outbound only) **
• Intercom (outbound only) **
• Set Preferred CODEC, Per Call, All Calls
• Configurable Dial/Numbering Plan Support
• Ringer and Handset Volume Controls
• Handset Input Gain Adjustment
• DNS SRV and Multiple A Records for Proxy Lookup and Proxy Redundancy
• Syslog, Debug, Report Generation, and Event Logging
• Secure Call Encrypted Voice Communication Support
• NAT Traversal
• Automated Provisioning, Multiple Methods. Up to 256 Bit Encryption: (HTTP, HTTPS, TFTP)
• Support Linksys Voice System Automatic Configuration
• Optionally Require Admin Password to Reset Unit to factory defaults
** Feature requires support by call server
Telephony
Features
Hardware • Voice Mail Message Waiting Indicator Light
• Redial Button
• Dedicated Flash Button
• Volume Control Button Cycles Through Volume Levels. Controls Ringer and Handset Volume.
• Standard 12-Button Dialing Pad
• High Quality Handset and Cradle
• Ethernet LAN – 10BaseT RJ-45
• 5 volt DC Universal (100-240 Volt) Switching Power Adaptor