LG WD-1259 series - Manual (Page 25)

25
aintenance M
The water inlet filter
- " " error message will blink on the control panel when water does not enter the
detergent drawer.
- If water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is therefore a good idea to clean it from time to time.
❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
❋ When disposing of the appliance, cut off the mains cable, and destroy the plug disable
the door lock to prevent young children being trapped inside.
1.
Turn off the water tap.
2.
Unscrew the water inlet hose.
3.
Clean the filter using a hard bristle
brush.
4.
Tighten up the inlet hose.