Setting the clock, Recording, User eq – LG MCD112 User Manual
Page 8
Setting the Clock
1. Press for at least 2 seconds:
2. Choose from either:
AM 12:00 (for an am and pm display) or 0:00
(for a 24 hour display).
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:
ON PLAYER
CLOCK
.bb
/BB>
SET
.bb
/BB>
SET
.bb
/BB>
SET
8
MINI Hi-Fi SYSTEM ] USER GUIDE
Recording
Record from a CD, AUX, USB or radio to cassette
Wind the tape to the point where you want the recording to start.
Use only normal tapes.
1. Open the TAPE 2 door :
2. Insert a blank tape :
3. Close the TAPE 2 door :
4. Select a mode (FM, AM, CD,
USB or AUX) in which you
want to record :
- Start playing the source you
want to record.
5. Puts the unit in standby
more for recording:
6. Start the Recording :
7. To stop a Recording :
ON PLAYER
ON REMOTE
Z
PUSH EJECT
CD, TUNER,
USB, TAPE or
AUX
REC
REC
x
STOP
FUNCTION
z
/[]
z
/[]
x
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD and
programmed titles automatically into a cassette.
1. Select the CD function :
2. Start the Recording :
The synchronized recording is
started automatically after
about 7 seconds.
3. To stop Recording :
ON PLAYER
ON REMOTE
CD
CD SYNC.
x
STOP
FUNCTION
USER EQ
1. Select a “USER EQ”:
2. When “USER EQ” is
displayed, press :
3. Select the sound effect you
want among BASS, MIDDLE
or TREBLE :
4. Adjust sound level
(MIN, -4 to +4, MAX) :
5. Repeat the steps from 2 to 3
to set other sound effect :
6. Press :
ON PLAYER
ON REMOTE
EQ.
SET
PRESET (-)
or
PRESET (+)
.bb
/BB>
SET
EQ
You can listen to music with the desired sound effect (BASS, MIDDLE
and TREBLE).