Basic operation – Legacy Car Audio LCD16DX User Manual

Page 2

1. REL BUTTON

Press it to detach the front panel when you want to take the unit away.

2. CLOCK ADJUSTMENT BUTTON

Press it to change the display to clock display. In clock display, press CLK button
for more than 2 seconds until time flashes on LCD, then press button to adjust
hour. Press button to adjust minute. When adjustment is completed, release it.

3. TUNE BUTTON

Rotate it to select your desired broadcasting station.

4.5. VOLUME +/- & SEL BUTTON

Press SEL button to change the mode as below:

VOL

BAS

TRE

BAL

FAD

(Volume) (Bass) (Treble) (Balance) (Fader)

A. The volume level can be adjusted at any time by pressing the + or – button as

select mode has been initially defaulted at volume mode.

B. Press the SEL button to select volume, bass, treble, balance, fader mode, then

use Volume + or – button to adjust them.

Note: The fader function for 4 speakers system only.

6. EQ BUTTON

Press it repeatedly to switch between 3 preset equalizer curves: CLAS, POP and
ROCK. The sound quality will be changed.

BASIC OPERATION

RPT

LOC

CLK

INT

MUTE

LUD

RDM

VOL