Technical specifications – Lucent Technologies CellPipe 55 Series User Manual
Page 2
To learn more about our comprehensive portfolio, please contact
your Lucent Technologies Sales Representative or Lucent
Business Partner, or visit our web site at www.lucent.com.
This document is provided for planning purposes only, and does
not create, modify or supplement any warranties which may be
made by Lucent Technologies relating to the products and/or
services described herein. The publication of information
contained in this document does not imply freedom from patent
or other protective rights of Lucent Technologies or third parties.
CellPipe is a registered trademark of Lucent Technologies Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
Cell v1.1003
Technical Specifications
1.Modes
Multi protocol router
IP , IPX and NetBIOS/IP router, HTTP /HTTPS server (WEBconfig),
DNS client, DNS server, DNS relay, DHCP client, DHCP relay and
DHCP server incl. autodetection
2.Ports
ADSL WAN (RJ-11)
Item no. 60682: Deutsche Telekom U-R2 T-DSL, ADSL over ISDN
(ITU G.992.1 Annex B), as well as ADSL over ISDN proprietary
(Texas Instruments, ADI, Alcatel), ETSI TS 101 388; Item no.
60681: ADSL over POTS (ITU G.992.1 Annex A, ANSI T1.413,
ITU G.992.2 (G.Lite), G.994.1 (G.hs))
Automatic detection of ADSL line codes, ATM parameters and
protocols
ISDN WAN (RJ-45)
ISDN SBus, point-to-point and point-to-multipoint
configuration, I.430, (autosensing); D channel 1TR6, DSS1
(Euro-ISDN); B channel PPP (asynchronous/synchronous),
X.75, HDLC, MLPPP for channel bundling, CAPI 2.0 via
LANCAPI, Stac data compression
Ethernet LAN (4 x RJ-45)
4 x Ethernet IEEE 802.3 (switch), 10/100Base-T autosensing,
node/hub autodetection, port segmentation configurable, e.g.
for DMZ mode or 4 separated local networks
3.Firewall
Stateful inspection, IP packet filter with port ranges;
masquerading (NAT/PAT) of TCP, UDP, ICMP, FTP, PPTP, H.323,
NetMeeting and IPSec; DNS forwarding; inverse masquerading
for IP services from the Intranet such as web server; support of
2 local networks; e.g. DMZ with own Internet address range
without NAT.
4.Quality of Service
IP traffic-shaping/limiting with dynamic, absolute or per
connection transfer limits or guaranteed minimum bandwidths,
TOS priority queuing.
5.Security
Intrusion detection (IP spoofing, login attempt, port scans),
denial-of-service protection (fragmentation error, SYN-flooding,
automatically closing of ports/connections). DNS hitlist as well
as wild card filter (URL blocking). High availability with ISDN dial
backup for Internet access or VPN connections. Email alerting,
SNMP traps and SYSLOG. PAP, CHAP and MS-CHAP as PPP
authentication, password-protected configuration remote
access per interface, access control list (IP, MAC and protocol
filter) for configuration access and LANCAPI, ISDN remote
access list. FirmSafe with two firmware versions for absolute
secure software upgrades.
6.LAN protocols
IP:
ARP, Proxy ARP, IP, ICMP, UDP, TCP, TFTP, RIP-1, RIP-2, DHCP,
DNS, SNMP, HTTP, HTTPS BOOTP, NTP, NetBIOS, LANCAPI
IPX:
IP, SAP, IPX and SPX watchdogs, NetBIOS watchdogs
7.WAN protocols
PPPoE, PPPoA, PPTP, IPoA and Plain Ethernet
8.Transmission rates
LAN (maximum)
10/100 Mbps, full duplex operation
WAN (maximum)
Downstream 8 Mbps, upstream 800 kbps
9.Statistics
Counter
Comprehensive ADSL, ATM, Ethernet, IP and DNS statistics;
SYSLOG error counter, connecting and online time as well as
transfer quantity per station; accounting information
exportable via CELLmonitor and SYSLOG, Firewall event log
10.Management
Outband
Command-line interface, serial V.24/V.28 port (8-pol. Mini-DIN)
Inband
CELLconfig incl. setup wizard for Internet access, security,
firewall, remote access and LAN-LAN coupling; CELLmonitor
status display; remote maintenance via ISDN; Telnet, browser
(HTTP/HTTPS) and TFTP configuration as well as firmware
upload; SNMP management via SNMP V2, WAN or LAN access
separately activated; simultaneous remote configuration and
management of several devices with CELLconfig, supervisor
alarm via SNMP traps, SYSLOG and eMail
Tools
CELLconfig (Windows configuration program), CELLmonitor
(Windows status display), WEBconfig (integrated web server)
11.Hardware
Power adapter
12 VA, external power adapter (230 V)
Enviroment
Temperature 5–40 °C; humidity 0–80 %; non-condensing
Housing
210 x 140 x 45 mm (B x H x T), robust plastic case, ports on the
back, prepared for wall mounting, Kensington-style lock
Approvals
EU (CE certification: EN 55022, EN 55024, EN 60950)