Lucent Technologies Voice Terminal 8405 - Manual (Page 9)

9
3 Adjust speakerphone volume if necessary:
To raise the volume, press the right half of the Vol-
ume control button labeled
; to lower the vol-
ume, press the left half of the Volume control
button labeled
.
To prevent the other party from hearing you
1 Press .
•
Red Mute light goes on.
2 Press again to resume talking to party.
•
Red Mute light goes off.
To change from speakerphone to handset
1 Pick up handset and talk.
To change from handset to speakerphone
1 Press .
2 Hang up handset.
To end a speakerphone call
1 Press again to hang up.
NOTE: With a DEFINITY G3V3 or later, if the person
you are talking with hangs up first, the call will be
disconnected. If you press
, you will get dial
tone.
To see number stored on an AD button
1 Press the softkey below View (for display users)
or Press .
2 Press selected AD button.
To see the last number you dialed
1 Press the softkey below View (for display users)
or Press .
2 Press the softkey below Last
or, if Last is not available on your display, press
or Dial the Last Number Dialed access code
_______.
STORED NUMBER (display feature)
Mute
Mute
Speaker
Speaker
Speaker
Stored
Stored
LastDialed
8405.qref.def3 Page 9 Monday, August 17, 1998 9:07 AM