Linksys WMCE54AG User Manual
Page 12
Dual-Band Wireless A/G Media Center Extender
6
Chapter 2: Getting to Know the Media Center Extender
Back Panel
AUDIO
The Extender offers two types of audio outputs, digital and analog. In most cases, you will use the AUDIO
(L and R) ports for analog audio; however, you have the option of digital audio if your TV offers a digital input.
DIGITAL
The DIGITAL port is where you will connect the optical cable for digital audio output.
AUDIO (L and R)
The L and R ports are where you will connect the left and right RCA audio cables.
VIDEO
The Extender offers three types of video outputs: composite (VIDEO port), S-video, and component video. In most
cases, you will use the VIDEO or S-VIDEO port; however, you have the option of component video if your TV offers
a component video input.
VIDEO
The VIDEO port is where you will connect the RCA video cable.
S-VIDEO
The S-VIDEO port is where you will connect the S-video cable.
VIDEO SELECT
Use this switch to indicate the type of video the Extender is sending to your TV. For video or
S-video, set this switch to the left. For component video, then set this switch to the right.
COMPONENT
VIDEO
These ports are where you will connect the component video cables (not included).