Lenovo D185 - Manual (Page 13)

2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
Press to open the main OSD menu. 2.
Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or ,
then press to select that function. Use or to make adjustments. Press to
save.
3.
Press to move backwards through the sub-menus and exit from the OSD. 4.
Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and
allow adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold the button for 10
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"or
"DDC/CI enable" shows on the screen.
1. Touch the lower right conner of the front bezel with finger slightl y then the function
key icon will light in blue.
6.
D185 Wide LCD Monitor User’s Guide