Lenoxx Electronics CD-52 - Manual (Page 9)

The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number
1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAM PLAY
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.During play, press the PROGRAM
button.
The word PROG will flash in the display.
Program number
2.Press the SEARCH button ( or )
to select track number 3 (example). PROG
and track number “03” will flash in the
displa y.
Track number
3.Press the PROGRAM button. Track 3 is
now programmed.
Program #2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
PLAY to begin programmed play.
PROG changes to be steady on in
the display, and music begins to play in
the order you programmed.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY
button to re-start normal play.
Your programming will be lost:
•
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
•
When the power is shut off or the CD
DOOR is opened.
8
PROG
PROG
PROG