Lenoxx Electronics CD-857 - Manual (Page 8)

IB-CD857(CDX85A-60B3)-WM-E-010905
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAMMED PLAY
During programming, the symbol PROG flashes in the display. To program songs to
play in your preferred order, follow steps below:
1.Press the PROGRAM button.
The symbol PROG and “ ” will flash
in the display.
2.Press the SKIP/SEARCH ( or )
buttons to select trac k number 3
(example). The symbol PROG and
track number “03” will flash in the
displa
y.
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in
the display, r eady for your next
selection of track.
4.Repeat steps 2 and 3 to program other
tr acks till you finish (up to 20
selections).
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP/OFF button once. Then you
may press the PLAY/PAUSE button to
restart normal play.
5.After programming is finished, press the
PLAY/PAUSE button to begin
programmed play. The symbol PROG
changes to be steadily on in the display,
and music begins to play in the order
you programmed.
Track number
Your programmed memory will be
lost:
• When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
• When the power is shut off or the CD
door is opened.
7
PROGRAM
SKIP/SEARC H
PLAY/
PAUSE
Program number
IB-CD857-WM(CDX85A-60B3)-E-010905.pmd 1/26/2005, 10:16 AM 8