Liebherr RBI 1400 - Manual (Page 9)

RBI/RB 1400 EKB/es 4250 5
O
PERATION
You are advised to clean the appliance before
switching it on for the fi rst time (see "Cleaning").
Turning the appliance on and off
W
Turning on: Press the on/off button 3 so that the
temperature display lights up or fl ashes.
- The lighting will light up when the door is open.
W
Turning off: Press the on/off button for approx.
two seconds so that the temperature display goes
out.
Setting the temperature
The appliance is pre-set for normal operation. We
recommend temperatures of +41°F (5°C) in the re-
frigerator.
In the refrigerator:
W
To reduce the temperature:
Press the DOWN button 2.
W
To increase the temperature:
Press the UP button 2.
- While you are entering the temperature, the set
temperature will fl ash on the display.
- When you press the temperature setting buttons
for the fi rst time, the most recent setting (known
as the "reference setting") is displayed.
- You can change the settings in increments of 1°F
(1°C) by briefl y pressing the buttons again. If the
buttons are held down the temperature setting will
change faster.
- The system switches back automatically about
5 seconds after the button was last pressed and
displays the aver-age cooling temperature (known
as the "actual setting").
- You can change the temperatures in the refrig-
erator between 48°F (9°C) and 40°F (4°C).
W
The temperature in the BioFresh compartment
is controlled automatically, between 32°F (0°C)
and 37°F (3°C).
A1
1
6
3 4 5 2
SuperCool
If you require a higher or lower temperature, e.g.
for storing fi sh, you can alter the temperature
setting in the BioFresh compartment. See "Addi-
tional functions" for more information.
Temperature display
The average temperature in the refrigerator com-
partment is displayed in normal mode.
If "
F0 " to " F 5 " appears in the display, the appliance
has a fault. Consult the customer service depart-
ment indicating the fault number displayed, so that
they can arrange for your appliance to be serviced
accurately and quickly.
Audible alarm signal
The audible alarm signal helps you to protect the
food in your refrigerator and save energy.
- It will sound when the door has been open for
longer than about 3 minute.
W
The signal will stop when you press the audible
warning on/off button 5,
- or when you close the door.
- The audible warning on/off button only works
when the door is open. Once the door is shut, the
alarm function automatically switches to standby.
SuperCooling
The SuperCooling function switches the appliance
to the coldest chilling setting.
It is ideal if you want to chill large quantities of food,
drinks or freshly prepared cakes or meals very quickly
or if you want greater humidity, e.g. for salad leaves.
W
To switch on: Press the SuperCooling button 4
briefl y so that it lights up. The refrigerator tem-
perature will drop to its lowest value.
NB: The SuperCooling function uses slightly more
energy. After approx. 6 hours, however, the ap-
pliance switches back automatically to normal
energy-saving operation.