Liebherr WU 40 - Manual (Page 15)

15
Problem Possible Cause and Remedy
Your appliance is designed and manufactured for a long life and reliable operation.
If a problem occurs during operation, check whether it is due to an operating error. Please note that even
during the warranty period, some repair costs may be your responsibility.
You may be able to correct the following faults by checking the possible causes yourself:
Motor seems to
run too long
- Is the ambient temperature too hot? See Safety Regulations.
- Has the appliance been opened too often or left open too long?
F0 or F1 appears
in the display
The temperature is
not cold enough
Appliance does not
work, display is off
The interior light
does not come on
Loud running noise
The appliance has a fault. Contact your nearest customer service representa-
tive, indicate the type of appliance, index and appliance / serial number.
- Is the appliance turned on properly?
- Is the power cord properly inserted in the outlet?
- Is the circuit breaker or fuse in operating condition?
- Is the appliance turned on?
- Is the interior light turned on?
- The interior light is defective. Contact your Liebherr Dealer or Representative.
- Is the temperature setting correct? See Setting The Temperature.
- Has an excessive amount of wine been placed in the appliance?
- Does a separately installed thermometer show the correct reading?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
- Is the appliance placed firmly on the floor, or does the compressor
cause nearby items of furniture or objects to vibrate? If necessary, move
the appliance slightly, align by adjusting the adjustable feet, or adjust bottles.
T
ROUBLESHOOTING
Appliance Information
Record this information when the appliance is
installed.
Type Designation: _________________________
Index: ___________________________________
Appliance / serial number: ___________________
Date of Purchase: _________________________
Where Purchased: _________________________
Customer Service
If none of the above possible causes apply,
and you can not rectify the fault yourself,
contact your nearest customer service repre-
sentative. Indicate the type (1) of appliance, service
number (2) and the appliance / serial number (3)
as indicated on the model plate. The model plate is
located on the left-hand inside wall.