Use these buttons for additional operations – Lenoxx Electronics CD-1095 User Manual
Page 7
IB-CD1095(SY)-WM-E-031604
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
To
Press or Adjust
Adjust the volume
VOLUME control
Stop playback
Pause playback
The PLAY/PAUSE lamp will
flash during pause. Press
again to resume play after
pause.
Go to the next track
Go back to the previous
track
Locate a point in a song
TIP
Remove the CD
Lift the right corner of the CD
DOOR (press STOP first).
VOLUME
CONTROL
FUNCTION SWITCH
(at the left side of the set)
OPEN THE CD DOOR
BY LIFTING HERE
6
If you bump the set
during CD play, the
music will stop or
skip for a few
seconds. This is
normal for this type
of player.
TIP
FORWARDS
BACKWARDS
To enjoy the music
without disturbing others
Insert your headphones (not
included) plug into the
PHONES jack (at the left side
of the set).
PHONES
JACK
STOP
PLAY/PAUSE
BACKWARD
FORWARD
STOP
PLAY/PAUSE
When CD play is
paused, the PLAY/
PAUSE lamp will
flash and no music
will play.
To resume play,
press the PLAY/
PAUSE
button
again, the PLAY/
PAUSE lamp will
stop flashing and
music will play.
Turn off the power
Slide the FUNCTION switch
(at the left side of the set) to
OFF position.
BACKWARDS or
FORWARDS , press
and hold down while playing
until you find the point.
IB-CD1095(sy)-WM-E-031604.p65
3/18/2004, 2:11 PM
7