Liebherr CS 16 - Manual (Page 5)

Figure 3.1
1. Unscrew upper hinge
pin.
2. Lift off upper door.
3. Unscrew upper hinge
plate, turn it 180° and
screw on the opposite
side.
Figure 3.2
4. Pull out middle hinge
pin.
5. Lift off lower door.
Figure 3.3
6. Unscrew middle hinge
bracket.
7. Transfer sleeve to the
opposite hole of bracket.
Figure 3.4
8. Pry out pressure plates
at the front and slide
away.
9. Transfer door handles
and plugs to the other
side. Reattach pressure
plates.
10. Transfer plug to the
opposite side of the
door.
Figure 3.5
11. Transfer plugs to the
opposite side.
12. Unscrew lower hinge
bracket and transfer
hinge pin to the oppo-
site hole.
13. Reassemble lower
hinge bracket on the
left side of the unit.
Figure 3.6
14. Reassemble middle
hinge bracket on the
left side of the unit.
15. Suspend lower door
on hinge pin and close
door.
Figure 3.7
16. Push in middle hinge
pin.
Figure 3.8
17. Suspend upper door
on middle hinge pin
and close door.
18. Insert upper hinge pin
and tighten.
Secure doors to prevent personal injury
and to prevent the doors from falling down.
CAUTION
!
5
I
NSTALLATION
Reversing Door Hinges
- Figure 3
1
2
3
5
4
7
6
8
9
9
10
11
12
13
16
17
18
14
15