Lincoln Electric CV-305 - Manual (Page 3)

CV-305
[3]
A CLOSER LOOK
RECOMMENDED OPTIONS
www.lincolnelectric.com
GENERAL OPTIONS
Remote Output Control
For remote output of welding
voltage. Consists of control box
with 25 or 100 ft. (7.6 or 30 m) of
four conductor cable and 6 pin
MS-type connector.
Order K857 for 25 ft. (7.6m).
Order K857-1 for 100 ft. (30m).
Remote Control Cable Adapter
Y connection adapter for
connecting K857 Remote Output
Control (6 pin plug connection) and
wire feeder input cable (14 pin plug
connection) to power source 14 pin
receptacle.
Order K864
Twist-Mate ® Cable Plug
For connecting welding cable to
output terminal receptacles. For
1/0 – 2/0 (50 – 70 mm
2 ) cable.
Order K852-70
Twist-Mate ® Cable Plug
For connecting welding cable to
output terminal receptacles. For
2/0 – 3/0 (70 – 95 mm
2 ) cable.
Order K852-95
Jumper Plug Kit
Required to close the contactor in
the power source when the power
source is used with a remote ouput
contactor such as the contactor in
the K449 LN-25, or K1870-1 LN-15
wire feeder.
Order K484
Undercarriage
Platform undercarriage with
mounting for two gas cylinders at
rear of welder.
Order K874
Universal Adapter Plug
The adapter plug allows user
connection of any suitable
accessory or wire feeder to the
output contactor and auxiliary
power circuitry. Consists of a 14
pin MS-type (Amphenol) connector
with 8” (203mm) stripped leads.
Order K867
QUALITY AND RELIABILITY
• Electronic and thermostatic protection from current overload or
excessive temperatures.
• “Cold” electrode with a solid state contactor when the trigger
is released for added safety.
• Microprocessor-based control PC board has built-in diagnostic
routines for quick and easy troubleshooting.
• Circuit boards are protected with a specially insulated coating
to extend life and ensure reliable performance.
• Solid state circuitry provides extra long life during repetitive
applications.
• Three-year warranty on parts and labor; seven-year warranty on
power rectifier.
• Manufactured under a quality system certified to ISO 9001
standards.