Figure 7, Figure 8 – Life Fitness GS4 User Manual

Page 9

Text mode
Original mode

1/2

FIGURE 7

STEP 7:

3/8 X 4-3/4” 10

3/8 LOCK NUT

SEAT FRAME

• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the SEAT

FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14) and one 3/8” LOCK NUT (12) as shown in FIGURE 7. Make
sure the CABLE is in the grooves of all the pulleys.

MAIN ARM

FIGURE 8

STEP 8:

• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the

MAIN ARM using one 3/8 X 2-3/4” BOLT (9), two STEP SPACERS 19/32” (13) and one 3/8” LOCK NUT (12) as shown in FIGURE
8. Make sure the CABLE is in the grooves of all the pulleys.

3/8 X 2-3/4” 9