Lenoxx Electronics CD-916 - Manual (Page 8)

IB-CD916(CDR79AD-60J8)-WM-E-010805
PROG
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAMMED PLAY
During programming, the symbol PROG flashes in the display. To program songs to
play in your preferred order, follow steps below:
1.Press the PROGRAM button.
The symbol PROG and “ ” will flash
in the display.
Program number
2.Press the SKIP/SEARCH button (
or ) to s elect track number 3
(example). PROG and the track number
“03” will flash in the displa
y.
Track number
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection
of the track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
PLAY/PAUSE to begin programmed
play. The symbol “PROG” changes to be
steadily on in the display, and music
begins.
NOTE:
- The player will stop automatically after
all pr ogrammed tr acks hav e been
played.
- To quit programmed play, press the
STOP/OFF button once. Then you may
press PLAY/PAUSE button to restart
normal play.
Your programmed memory will be
lost:
• When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
• When the power is off or the CD door
is opened.
7
PROGRAM
SKIP
SEARCH
PLAY
PAUSE
PROG
PROG
IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd 2/23/2005, 11:49 AM 8