LevelOne MIDSPAN POH-0850TX - Manual (Page 17)

15
Parametric Information
Discovery R (ohms): display resistance value.
Port Current (mA): display current value.
Port Voltage (V): display voltage value.
Port Power (W): display watt value.
Class Current (mA): display class current value. When you enable the “Bypass
classification” function, the class current value will not show in here. Please refer
to the following table for output value.
Class Usage
Maximum power of levels at
output of PSE
0 Default 15.4 Watts
1 Optional 4.0 Watts
2 Optional 7.0 Watts
3 Optional 15.4 Watts
4 Reserved for future use Treat as Class 0
Determined Class: display power class. When you enable the “Bypass
classification” function, the class value will not show in here.
Figure 4-6. Parametric Information interface