Lowrance electronic Lowrance GlobalMap 3500C - Manual (Page 15)

9
Menu Commands
A menu command or a menu option will appear in small capital letters,
in a bold sans serif type like this:
R
OUTE
P
LANNING
. These indicate that
you are to select this command or option from a menu or take an action
of some kind with the menu item. Text that you may need to enter or
file names you need to select are show in italic type, such as trail name.
Instructions = Menu Sequences
Most functions you perform with this unit are described as a sequence
of key strokes and selecting menu commands. We've written them in a
condensed manner for quick and easy reading.
For example, instructions for navigating a trail would look like this:
1. From the Map Page, press MENU | MENU |
↓
to M Y T RAILS
| ENT .
2. Press
↓ to Trail 1|
ENT |
→|↓ to
N
AVIGATE
| ENT .
3. You are asked to wait while it converts the trail into a route.
4. The wait message disappears and the GlobalMap 3500C begins
showing navigation information along the trail. Now, begin moving and
follow your GlobalMap 3500C.
Translated into complete English, step 1 above would mean: "Start on
the Map Page. Press the Menu key twice. Next, repeatedly press (or
press and hold) the down arrow key to scroll down the menu and select
(highlight) the My Trails menu command. Finally, press the Enter key."
Step 2 would mean: "Press the down arrow key repeatedly to scroll to
the trail named Trail 1, and press Enter. Next, press the right arrow
key and then the down arrow key to highlight the Navigate command,
then press Enter."