Lowrance electronic X96 - Manual (Page 60)

54
Data list showing Water Distance selected for display on Sonar Page.
3. To return to the previous page, press EXIT | EXIT .
To turn off displayed data:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. Press
↓ or ↑ to select Data Type|
ENT | ENT. The selected data type
disappears from the top of the list. (If you wish, you may now use
↓ or ↑
to select other Data Types to turn off.)
2. To return to the previous page, press EXIT .
To change displayed overlay data size:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. Press
↓ or ↑ to select Data Type|
ENT . Press ↓ to Overlay Size and
press ENT . Use the
↑ ↓ keys to select the desired overlay size and press
ENT | EXIT | EXIT.
The selected data type will be displayed in the new size. (To change the
font size for another Data Type, repeat these steps, beginning with step
two above.)
Tip:
If you wish, you can change the size of displayed overlay data when
selecting a data type:
1. Press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. Press
↓ or ↑ to select Data Type|
ENT , then press
→ or ← to
switch the data to the desired size. Press EXIT | EXIT to return to the
main display.
NOTE:
Some data types can be displayed in only one font size. If that is the
case, the Data Size box will not be displayed for that data type.