Lincoln Electric Invertec V155-S - Manual (Page 2)

Invertec ® V155-S
www.lincolnelectric.com [2]
A CLOSER LOOK
Key Controls
1) Stick /Touch Start TIG ® Modes
2) Status Lights
3) Output Control
4) Twist-Mate ™ Connectors
1
SYSTEM SELECTION
TIG Ready-Pak ® Welding Package
Order a Lincoln TIG Ready-Pak ® Package and get a complete welding package.
Each Package Contains:
• Invertec ® V155-S
• Stick electrode holder and cable [10 ft. (3.0 m)] with Twist-Mate ™ plug
• Work clamp and cable [10 ft. (3.0 m)] with Twist-Mate ™ plug
• Fully adjustable shoulder strap
• 120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug
• Extra 120V 20 Amp plug
• Gas Regulator
• PTA-17V TIG torch with Ultraflex ™ cable and Twist-Mate ™ adapter
• PTA-17 TIG accessory kit (KP508)
• Easy-Store/Easy-Carry Suitcase
Order:
K2606-1 Invertec ® V155-S TIG Ready-Pak ® Package
Touch Start TIG ® Mode
Machine has a low open circuit voltage in TIG
mode to reduce tungsten contamination. Simply
touch the tungsten to the work piece and lift off.
The machine will instantly ramp up the voltage
and current to establish the arc without the use
of high frequency.
Two Stick Modes
Soft Mode
Provides a lower arc force level to de-
liver a smooth arc with reduced spatter.
It provides a clean flat fillet weld with
excellent wetting and bead appearance.
For stainless electrodes such as Red
Baron
® 308L (E308L-16), rutile elec-
trodes such as Fleetweld ® 37 (E6013),
and low hydrogen electrodes such as
Excalibur
® 7018 MR.
Crisp Mode
Provides a more dynamic arc charac-
teristic for welding in all positions.
For cellulosic electrodes such as
Fleetweld
® 35 (E6011).
2
3
4
Shown: K2606-1 Ready-Pak ® Pkg.