Lindy 51550 - Manual (Page 4)

User Manual English
- 4 -
Installation
The LINDY ExpressCard Wireless Presenter is designed to fit directly into an ExpressCard/34
or ExpressCard/54 slot. However, if your computer is equipped with a PCMCIA port, you may
place the Presenter into the supplied PCMCIA Adapter before storing it.
Placing the Presenter in the Adapter
Insert the bottom of the Presenter into the
top of the PCMCIA Adapter and then push
the presenter into position, as shown.
Removing the Presenter from the Adapter
Push the Presenter up from beneath and
remove from the PCMCIA Adapter as
shown.
Initial Set Up
1. Remove the Battery Cover and insert
the supplied CR2032 battery with the
Positive (+) side facing towards you.
2. Remove the USB Receiver from the
back of the Presenter and plug it into an
available USB port on your Computer.
3. Your Computer will recognise the new
hardware and automatically install the
required drivers.