Life Fitness Multi Adjustable Bench User Manual
Page 7

1. Attach the REAR SUPPORT (1) to the SEAT FRAME (2) using two M10 x
25mm BOLTS (3), four 3/8" SAE WASHERS (4), and two M10 NYLOCK
NUTS (5) as shown. Tighten all BOLTS and NUTS securely.
2. Attach the SEAT PAD (6) to the SEAT FRAME (2) using one M10 x 35mm
BOLT (7), one M10 x 70mm BOLT (8) and two 3/8" SAE WASHERS (4).
Attach the LUMBAR PAD (9) to the SEAT FRAME using two M10 x 95mm
BOLTS (10) and one 3/8" SAE WASHERS (4). Attach the BACK PAD (11)
to the SEAT FRAME using three M10 x 35mm BOLTS (7), and three 3/8"
SAE WASHERS (4). Tighten all BOLTS securely.
3. Adjust the bench to its highest incline position. Attach the RUBBER PAD
(12) to the SEAT FRAME (2) using four M5 x 12mm SCREWS (13) and
four #10 FLAT WASHERS (14). Tighten all SCREWS securely.
4. Install 1" HOLE PLUGS (16) into all open bolt holes.
- T3 Treadmill (6 pages)
- F3 Folding Treadmill (12 pages)
- T7 Treadmill (8 pages)
- T3 Treadmill (19 pages)
- T5 Treadmill (1 page)
- Platinum Club Series Treadmill (21 pages)
- Arctic Silver T3.5 Treadmill (9 pages)
- FZTP (17 pages)
- MTSLE (18 pages)
- Sport and Essential Consumer Treadmills (3 pages)
- CTSX30-0102-01 (8 pages)
- Cable Motion 8352100 REV. B (26 pages)
- Cable Motion 39721 (24 pages)
- Pro 2 Series PSPD (11 pages)
- 91Xi (83 pages)
- 91TW (22 pages)
- Utility Bench (8 pages)
- Hammer Strength OHDRacks (6 pages)
- 8216 (7 pages)
- GS5 (11 pages)
- TR-7500 (3 pages)
- Parabody 805 (11 pages)
- HDCR9 (13 pages)
- 18 \ 90 Series (8 pages)
- OHD-MIP (10 pages)
- Pro 2 Series PSFLY (10 pages)
- Hammer Strength OHDMR (15 pages)
- GS6 (1 page)
- UPRIGHT LIFECYCLE 95C (1 page)
- LIFECYCLE R3 (2 pages)
- GS4 (12 pages)
- FZHAD (13 pages)
- FIT 3 (1 page)
- 889 (16 pages)
- MTSRL (21 pages)
- 887 (16 pages)
- GK53-00002-0012 (2 pages)
- C3 (2 pages)
- Pro 2 Series PSSLPSE (22 pages)
- T7i (8 pages)
- Arctic Silver 93XW-0XXX-03 (17 pages)
- 874 (12 pages)
- Classic Series Cross-Trainer CLSXH (8 pages)
- Exercise Bike Inspire Console 97C Lifecycle (42 pages)
- Hammer Strength MTS (6 pages)