LifeSource UC-322 User Manual
Page 10
Displaying Weight Data Saved in Memory
The procedure below is an example of how to display the weight data of User 1
that was saved in memory.
1
With the scale turned off, press and
hold Switch 1.
To display the weight data of User 2,
press and hold Switch 2.
2
Release the switch when “ - ”
appears. Then, press Switch 2 within
five seconds.
If Switch 2 is not pressed within five
s e c o n d s , t h e s c a l e t u r n s o f f
automatically.
3
The data number and weight data
are displayed.
The weight data is displayed in order
from the most recent to the oldest.
4
After the oldest data is displayed,
“End” appears and the scale turns
off automatically.
- 10 -