Lenco Marine DVP-722 - Manual (Page 27)

Changing AUDIO output
Setting Audio Output
1.Press SETUP on the remote control.
2.Use the direction keys ( ) to select AUDIO SETUP and its sub-menu.
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
Note:
SPDIF/OFF:select this when you do not want to have digital
audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby
Digital or DTS decoder which gives 5.1 channel
sound.
SPDIF/PCM:select this when the external amplifier has no
decoder.
P/N
TITLE
DISPLAY
ANGLE LANGUAGE SUBTITLE
MUTE L/R
1 2 3 4
5 6 7 8
ENTER
SLOW
ZOOM REPEAT MARK GOTO
STANDBY
9 0
MENU/PBC
REMOTE CONTROL MODEL No.:RMC-221
SETUP
10+ AUDIO SETUP
AUDIO OUT
EXIT SETUP
SPDIF/OFF
SPDIF/PCM
SPDIF/RAW
525