LG LW1004ER - Manual (Page 26)

26
PREFERRED METHOD
Ensure proper ground
exists before use
Fig. 24
3-prong
grounding
plug
Ground
prong
Power
supply
cord
3-prong
grounding
type wall
receptacle
Electrical Safety (LW1804ER MODEL)
IMPORTANT
(PLEASE READ CAREFULLY)
FOR THE USER'S PERSONAL SAFETY, THIS
APPLIANCE MUST BE PROPERLY GROUNDED
The power cord of this appliance is equipped with a
three-prong (grounding) plug. Use this with a standard
three-slot (grounding) wall power outlet (Fig. 24) to
minimize the hazard of electric shock. The customer
should have the wall receptacle and circuit checked by
a qualified electrician to make sure the receptacle is
properly grounded.
DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
FUSE – Use a time-delay fuse or circuit breaker. Refer
to serial plate for proper power supply
requirements.
230, 208, and 230/208 VOLT UNITS
These units are equipped with a three-prong grounding
plug on the power supply cord, which must be plugged
into a matching properly grounded three-prong wall
receptacle for your protection against possible shock
hazard. If such an outlet is not present, one must be
installed by a qualified electrician in accordance with
the National Electrical Code and local codes and
ordinances.
: DO NOT USE AN EXTENSION CORD
on 230, 208, and 230/208 Volt units.
NOTICE