Linear HTS-ES1 - Manual (Page 18)

18
Karaoke Operation
Connecting the Microphone(s):
(microphones not supplied)
1. Turn the microphones Off.
2. Insert the microphone plug into the micro-
phone jack. If only connecting one micro-
phone, insert it into the MIC 1 jack.
3. Turn the microphone(s) On.
4. Adjust the microphone(s) volume to the
desired level.
ENTER
MENU
USB MIC VOL 1 MIC VOL 2 MIC 1 MIC 2 ECHO AUX IN
SPEAKERS A B A+B
BAND
OPEN/
CLOSE
MODE SCAN
MUTE MIC
®
EQ
EQ
VOLUME +
EQ
Microphone 2
Microphone 1
Note: Before inserting the microphone plug into
the microphone jack, make sure the MIC VOL
(microphone volumes) are set to the minimum.
MIC VOL 1 MIC VOL 2 MIC 1 MIC 2 ECHO AUX IN
®
AM
Minimum
Volume
Maximum
Volume
Echo Control:
Rotate the ECHO knob clockwise to increase the
echo of both microphones. Rotate counterclock-
wise to decrease the echo.
MIC VOL 2 MIC 1 MIC 2 ECHO AUX IN
SPEAKERS A
AM
Decrease Increase
Muting the Microphone(s):
Press the MIC button to turn On/Off the micro-
phones.
ENTER
MENU
USB MIC VOL 1 MIC VOL 2 MIC 1 MIC 2 ECHO
BAND
OPEN/
CLOSE
MODE SCAN
MUTE MIC
®
EQ
DVD
HTS-ES1-UM1 (First Lot).qxp 2/7/08 2:29 PM Page 18