LG Aria 186 - Manual (Page 25)

● aria
186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
24
CO Message Wait (CLI Message Wait)
Button Procedures Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is
displayed on the LCD of the station. If the DISA/DID external party hangs up the call before
answered, the CLI will be stored in the CO message wait queue in the called party.
To retrieve CLI Message,
●
Press CALLBK button.
● The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
● Press CONF button.
To make a callback,
● Press HOLD/SAVE button.
● The stored number is dialed as speed dialing.
To see the next/previous CLI message,
● Press VOLUME button.
To delete all CLI messages,
● Press SPEED button twice.
● If DVU message is stored with CLI message, the CLI message
will not be deleted by pressing SPEED button.
DISA (Direct Inward System Access)
● Dial the CO access code after hearing dial tone or voice guide
from DVU.
● Or, dial the CO access code after dialing the programmed
authorization code (when needed) for outgoing call.
Button Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
LCD Language Change
Button Procedures Range
● Press TRANS/PGM button and dial 5 1
● The language in LCD is changed into default value.
● If pressing TRANS/PGM + 5 1, the language
in the LCD is changed to the nation’s language.
System Features
Button Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
● Dial * 5 6 5.
● Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.