LaCie 400USB - Manual (Page 19)

LaCie d2 DVD ±RW Drive
User Manual page
Getting Connected
Connect Cable A to your LaCie Drive.
Connect Cable B to the power supply brick ( C ).
Connect Cable B to a surge protector or wall outlet.
1.
2.
3.
2.2. Connecting the Power Supply
The power supply kit is composed of two cables: one
cable (A) connects to the LaCie drive; and the other
cable (B) connects to a power outlet, such as a wall out-
let or a surge protector.
LaCie Ltd . XXXXXX
Serial Nu mber XX XXXXXX X
ON OFF
C
CAUTION:
Only use the AC adapter supplied with your spe-
cific LaCie drive. Do not use a power supply from
another LaCie drive or another manufacturer. Us-
ing any other power cable or power supply may
cause damage to the device and void your war-
ranty.
Always remove the AC adapter before trans-
porting your LaCie drive. Failure to remove the
adapter may result in damage to your drive and
will void your warranty.
If your power supply gets damaged, a re-
placement can be purchased from your lo-
cal LaCie retailer or on the LaCie Web site:
www.lacie.com
❖
❖
❖
A
B