Light & Motion BLUEFIN HC7 - Manual (Page 14)

12
Right Smart Grip Controls (Refer Fig. 14)
Tele - Zooms camcorder to telephoto.
Wide - Zooms camcorder to wide angle.
Rec - Toggles camcorder between record/standby.
Mom.Af - Press and hold this button to put the camcorder into “momentary AF”.
Camcorder remains in AF as long as the button is pressed. Once released,
the camcorder switches to manual focus. This is useful in stopping the camcorder
from “seeking” when filming in a low contrast environment. To return the camcorder
to AF, press the AF/OFF button.
Af / Off - (dual function) - Press and release, to switch camcorder to auto focus.
Press and hold for 3 seconds, to turn the camcorder off.
Front Plate (Refer Fig. 14)
Flip Filter - Rotate lever to engage or disengage color correction filter.
Rear Plate (Refer Fig. 15)
On/Mode - Turns the camcorder on and cycles through modes.
Housing Left Side (Refer Fig. 16)
Manual - Activates the camera’s manual button. Briefly pushing this button activates
manual control of the active function. You can change the active function by pushing
and holding the button until the menu of options appears on the display.
Camera Control Knob - Adjusts the function activated with the Manual button.
Touch Screen Controls - Three buttons and one rotary control allow partial access
to the camera’s P-Menu. Rotate the knob to position the internal selector over a
button on the camera’s screen. Press the buttons to access various controls on the
camera’s screen (Refer Fig. 17a and 17b).