Lynx L-LS - Manual (Page 3)

eDART™ System User Guide
Appendix 34
Step 4.
Hold the limit switch in place and use a ty-wrap to tighten
it down to the tie-bar. See figure 29.
More than one ty-wrap can be tied together if the tie-bar is
large.
Figure 29: Lynx™ Mold-Closed Limit Switch L-LS side view
Table 26: Figure Labels
Step 5.
Plug a Lynx™ cable between the limit switch and the
eDART System™.
Step 6.
Run the machine to ensure proper use, while monitoring
the eDART™ software.
C
A
L-LS
B
D
A Moving Half
B Ejector Plate
C Tie Bar
D Tighten Ty-Wrap
U
Always power down before working on
any equipment.