LaCie Starck Desktop - Manual (Page 5)

Manufacturer’s Declaration for CE Certification
We, LaCie, solemnly declare that this product conforms to the follow-
ing European standards: Class B EN60950, EN55022, EN55024
With reference to the following conditions: 73/23/EEC Low Voltage
Directive; 89/336/EEC EMC Directive
LaCie | Starck Hard Drive
Tested to comply with
FCC standards for
home or office use
precautions
Do not stack more than two (2) LaCie | Starck Desktops together. Do not expose the drive to temperatures
over 35° C (95° F) or 30° C (86° F) when stacked. Do not expose the device to liquids. Use only the
power supply shipped with the device.
Warranty Information
LaCie warrants your product against any defect in material and workmanship, under normal use, for
the designated warranty period. The warranty becomes effective from the date of shipment. In the event
this product is found to be defective within the warranty period, LaCie will, at its discretion, repair or
replace the defective product. This warranty is void if:
• The product was operated/stored in abnormal use or maintenance conditions;
• The product is repaired, modified or altered, unless LaCie expressly authorizes such repair,
modification or alteration in writing;
• The product was subjected to abuse, neglect, electrical fault, improper packaging, accident or
acts of nature;
• The product was installed improperly;
• The serial number of the product is defaced or missing;
• The broken part is a replacement part such as a pickup tray, etc.
• The tamper seal on the casing is broken.
For the latest documentation and software updates, please go to:
http://www.lacie.com/us/support/documents/index.htm?id=10007
Intelligent surface: After running the LaCie Setup
Assistant, launch the LaCie Desktop Manager to
assign actions to be triggered when you touch the
intelligent surface. For more information, refer to the
user manual.
(...)
ONE TOUCH LAUNCH
QIG_Fusion-Desktop_090715.indd 5 7/14/09 6:28:19 PM