Lenoxx Electronics CD-103 - Manual (Page 8)

LISTENING TO THE RADIO
Connect the supplied AC power cord or batteries (see page 4).
Slide the FUNCTION switch to RADIO
position, the POWER lamp will be on.
1
2
3
1
2
3
Slide the BAND switch to the proper band
position (AM, FM, or TV1, TV2 (WEATHER
BAND)) that you want.
Select AM to tune AM radio stations.
Select FM to tune FM radio stations.
Select TV1 to tune TV channels 2 through 6.
Select TV2 to tune TV channels 7 through 13,
including WEATHER BAND.
Tune into the station you prefer using the
TUNING control (at the right side of the set).
Adjust for the clearest sound.
4
The FM STEREO indicator will light up when
receiving FM Stereo broadcasts.
7
4
T
U
N
I
N
G
IB-CD103(SY)-WM-E-053002
WEATHER
NOTE 1: When tuning to TV band stations, many times a loud
buzzing will be heard, which results from the video portion
of the TV signal. This is normal for all TV band radios.
NOTE 2: TV band and Weather Band signals are weaker than
normal FM signals. Most TV band signals have a range
of only 50 miles (maximum) from the broadcast station.
NOTE 3: Some noise or 2 way radio conversations may be heard
on the TV band or Weather Band, this is normal and
results from the weaker signals of these broadcasts.
WB may not be received in all areas due to a lack of
transmission coverage for those areas or in some fringe
areas where TV signals can only be received by using
Cable.
FM
STEREO
POWER