LG GCC-4480B - Manual (Page 13)

DirectCD TM v2.5b(s) Installation
10
Connecting
the Interface
Connector
Connecting
the Sound
Card
Replacing the
Computer
Cover
Connect the 40-pin IDE cable to the back of the CD-RW/DVD-ROM
Drive, making sure the coloured (red) stripe on the IDE cable is
connected to pin 1 on the CD-RW/DVD-ROM drive. Pin 1 is closest to
the Power Connector.
NOTE : Generally, the IDE connector is keyed and will only fit one way.
DIGITAL
AUDIO ANALO G AUDIO
INTERF ACE
POWER
D G
39
40
1 +5 GND +12
2
C S M
S L A R G L
Pin1
Red-edge
If the computer is using a sound card, the drive is connected to the sound
card with an audio cable. The supplied analog audio cable fits most sound
cards or one can be purchased at a local computer store.
Refer to the manual for the sound card for detailed
information regarding connection.
DIGITAL
AUDIO
D G R G L C S M
S L A 39
40 1
2 +5 GND +12
ANALOG
AUDIO INTERFACE POWER
L R
DIGITAL
AUDIO ANALOG
AUDIO
INTER
D G
39
40
C S M
S L A R G L
marking L-R
Sound card
When the installation of the drive unit is complete, replace the computer
cover