beautypg.com

How to use the washer, Caution, Beeper – LG WM2688H series User Manual

Page 16: Wash/rinse temperature, Spin speed (drain/spin cycle), Soil level

background image

HOW TO USE THE WASHER

ENGLISH

1 5

SteamFresh

TM

cycle

• For slightly wrinkled clothes which have been stored

for an extended time. It makes wrinkled clothes
easier to iron (Do not load wet clothes).

• Wrinkles and odors will be reduced.

• To use the SteamFresh

TM

cycle :

1. Turn on the washer and select the SteamFresh

TM

cycle.

2. Load 5 items or less and close the door.

NOTE: Wipe the water off the drum.

3. Press the Steam button repeatedly until the

correct number of items is displayed.

4. Press the Start/Pause button.
• After the SteamFresh

TM

cycle is complete, the drum

will tumble for 30 minutes to prevent re-wrinkling.

Press any button to unload the items. The Remote
Laundry Monitor (RLM) will display “End” for 2
minutes and then will display “---” for 28 minutes.

• After the SteamFresh

TM

cycle is complete, open the

door and allow it to cool down for best results.

Precautionary Notes:
- The SteamFresh

TM

cycle is not like other washing or

drying cycles.

- Due to the characteristics of cotton fibers, this cycle is

not recommended for 100% cotton clothing.

- Remove stains from clothing before using the

SteamFresh

TM

cycle to prevent permanently setting the

stains by high heat.

- Be sure the faucet is open. This cycle uses a little water

to produce steam.

- Be careful not to touch the door. It can be very hot.
- Do not load the following items:

Wool, blankets, leather jackets, silk, wet clothes,
lingerie, foam products, or electric blankets.

- After removing clothes from the SteamFresh

TM

cycle

they may feel slightly damp. Wait at least 10 minutes
before putting the clothes on.

- Best results are achieved when articles are of similar

size and fabric type. Do not overload.

CAUTION:

- Do not reach into the washer while operating. Steam

can cause severe burns.

- Keep pets away from the washer.

• Press repeatedly to adjust the volume of the

Beeper.

9. Beeper

• Select a water temperature based on the type of

load you are washing.

• Follow the fabric care label and chart below for

best results.

• Warm rinses leave the loads dryer than cold

rinses. Warm rinses increase wrinkling.

• In cold climates, a warm rinse makes the load

more comfortable to handle.

• Cold rinses save energy.

• The Cold rinse temperatures depend on the cold

water at your faucet.

• This washer automatically adjusts the water level

for the type and size of wash load for best results.
It may seem there is no water inside the drum in
some cycles, but this is normal.

6. Wash/Rinse Temperature

• To change the spin speed, press the Spin Speed

button repeatedly to cycle through available
options.

• To start Drain/Spin cycle:

1. Press Power

button to turn on.

2. Press Spin Speed button only.

3. Press Start/Pause

button.

7. Spin speed (Drain/Spin cycle)

• To change the soil level, press the Soil Level

button repeatedly until the desired setting is on.

8. Soil Level

Suggested Wash Temp.

Garment

Kitchen towels, sheets,

and baby garments

Whites and Heavy

soiled color-fast items

Most loads

Brightly colored items,

washable woolens

Extra Hot

Hot

Warm

Cold

!