Life Fitness Olympic Incline Bench User Manual

Page 7

Text mode
Original mode

1. Assemble the LEFT UPRIGHT (1) and RIGHT UPRIGHT (2) onto the CEN-

TER FRAME (3) using three M10 X 90mm SCREWS (4), six 3/8" SAE
WASHERS (5), and three M10 NYLOCK NUTS (6) as shown. Tighten all
SCREWS and NUTS securely.

2. Assemble the SEAT PAD (7) onto the CENTER FRAME (3) using two M10

X 35mm SCREWS (8) and two 3/8" SAE WASHERS (5) as shown. Tighten
the SCREWS securely.

3. Assemble the BACK PAD (9) and HEAD REST PAD (10) onto the CENTER

FRAME (3) using four M10 X 35mm SCREWS (8), one M10 X 95mm
SCREW (11), and five 3/8" SAE WASHERS (5) as shown. Tighten all
SCREWS securely.

4. Install 1" HOLE PLUGS (12) in all open screw holes.