La Crosse Technology Wireless Temperature Station WS-7013TWC - Manual (Page 10)

7
time of occurrence of the value for
outdoor temperature will also flash.
B. RESETTING THE MINIMUM AND
MAXIMUM TEMPERATURES
1. To reset both the minimum and
maximum temperatures—press and
hold the RESET/+ button for 4
seconds.
C. ADDING ADDITIONAL
REMOTE CONTROL SENDERS
(OPTIONAL)
1. The WS-7013U is able to receive
signals from 3 different Remote
Control Senders. Following are some
brief instructions for the basic set-up
of Remote Control Sender units with
the WS-7013U. These extra sensors
can be purchased through the same
dealer as this unit, or by contacting
La Crosse Technology directly. A
TX2U will monitor temperature only,
a TX3U will monitor temperature and