LG HTW316 - Manual (Page 10)

10
Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
11 Connect the MONITOR OUT jack from the DVD
Receiver to the video in jack on the TV using the
video cable supplied (V).
2 2 Connect the Left and Right AUDIO OUT jacks from
the DVD/CD Receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
S-Video connection
11 Connect the S-VIDEO OUT jack from the DVD/CD
receiver to the S-Video in jack on the TV using the
S-Video cable (S).
2 2 Connect the Left and Right AUDIO OUT jacks from
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
Component Video (Color Stream ® ) connection
11 Connect the COMPONENT VIDEO OUT jacks from
theDVD/CD receiver to the corresponding in jacks
on the TV using an Y Pb Pr cable (C).
2 2 Connect the Left and Right AUDIO OUT jacks from
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
Progressive Scan (ColorStream ® pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD receiver.
11 Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD receiver to the corresponding in jacks
on the TV using an optional Y Pb Pr cable (C).
2 2 Connect the Left and Right AUDIO OUT jacks from
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the supplied audio cables.
ote
– Set the Progressive to “On” on the Setup menu for
progressive signal, see page 20.
TV Connections