Operating instructions, Ao 6004 audio output unit – Listen Technologies Audio Output Unit AO 6004 User Manual
Page 7

Danish Interpretation Systems
User Manual
Manual 01 18 04442
7
Operating instructions
AO 6004 Audio Output Unit
General description
The AO 6004 Audio Output Unit for the DCS 6000
system enables the user to record the sound from a
number of interpreted language channels or floor
channel on external devices such as tape- or hard
disk recorders by analogue interface.
It can also be used to distribute sound channels to
for example infrared distribution or loudspeaker
system.
Features
•
Decoding of 4 language channels into analogue
audio chosen out of the possible 31 digital
channels as well as the Floor channel in 3
qualities.
•
The 4 decoded channels are available on 4
analogue outputs (XLR connectors).
•
A number of AO 6004 can be combined to
decode more channels. Up to 20 pieces AO
6004 can be connected and configured in one
system to decode more channels.
•
Easy to use with preconfigured settings and
automatic channel assignment at start-up:
Output A – channel 0
Output B – channel 1
Output C – channel 2
Output D – channel 3
•
User control of the AO 6004 by sending
commands from a PC via CU 6005/6010.
•
The unit is connected to the bus as any other
unit and by controlling it from the CU
6005/6010 it can be placed anywhere in the
system.
•
The unit can be used as a single unit, installed
in a 19’’ rack or inserted in a slot in the CU
6005.