Lanzar Car Audio SNV90 - Manual (Page 10)

6)Tap to enter volume option menu.
There are two method to adjust the
volume: Method A: When you select
or
, press OK button on remote
control to adjust the system volume
level. Method B: When you select ,
press / (Left/Right) buttons on remote
control to adjust the volume up or down.
Tap chock box
to mute the
sound. Tap to select keyclick and
screenclick volume type among: None,
Softness or Generosity. When finishing
volume setup, tap
to save and
exit current menu.
7) Tap to enter system info interface.
The following information will be
displayed in this interface: SN (Serial
No.), Hardware Version, Software
Version, Total Memory and Available
Memory.
• Navigation
When you connect a GPS box to DVD
unit, turn GPS box on then switch the
DVD unit mode to navigation mode,
you will enter the control interface like
followed:
Use the remote control or tap icon
to see following two navigation
interface:
Tap to enter destinations menu:
Now you can navigate to anywhere you
want just following the instruction on
the navigation interface.
How to use the navigation software,
please refer to the navigation software
instruction manual.
Note: In the video mode, you must
select video output signal to the monitor.
And In RGB mode, you must select
RGB output to the monitor.
10
OPERATION