7 appendix, Controlling a tv with the supplied remote control, Setting up the remote to control your tv – LG BD678N User Manual

Page 58

7
Appendix

Appendix

Controlling a TV with
the Supplied Remote
Control

You can control your TV using the buttons
below.

By pressing

You can

( TV POWER)

Turn the TV on or of.

AV/INPUT

Switch the TV’s input
source between the TV
and other input sources.

PR/CH +/–

Scan up or down
through memorized
channels.

VOL +/–

Adjust the volume of
the TV

TV MUTE

Turn the TV’s volume on
or of.

NOTE

Depending on the unit being connected, you may

not be able to control your TV using some of the
buttons.

Setting up the remote to
control your TV

You can operate your TV with the supplied

remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.

1. While holding down

( TV POWER) button,

and press the manufacturer code for your
TV with the numerical buttons (see the
table below).

Manufacturer

Code Number

1(Default), 2

Zenith

1, 3, 4

GoldStar

1, 2

Samsung

6, 7

Sony

8, 9

Hitachi

2. Release the

( TV POWER) button to

complete setting.

Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.

7
Appendix

This manual is related to the following products:

BD550