Lennox Hearth ELITE E36ODGPE-H - Manual (Page 9)

9 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Warranty
Your gas appliance is covered by a limited twenty
year warranty. You will find a copy of the war-
ranty accompanying this manual. Please read
the warranty to be familiar with its coverage.
Retain this manual. File it with your other docu-
ments for future reference.
repLaceMent parts
A complete parts list is found at the end of
this manual. Use only parts supplied from the
manufacturer.
Normally, all parts should be ordered through
your Lennox distributor or dealer. Parts will be
shipped at prevailing prices at time of order.
If you encounter any problems or have any ques-
tions concerning the installation or application
of this system, please contact your distributor,
or Lennox directly:
Lennox HeartH products
0 West taft avenue
orange, ca 92865
product reFerence inForMation
We recommend that you record the following important information about your fireplace. Please
contact your Lennox dealer for any questions or concerns. For the number of your nearest Lennox
dealer, please call 1-800-9-LENNOX.
Your Fireplace's Model Number ________________________________________
Your Fireplace's Serial Number ________________________________________
The Date On Which Your Fireplace Was Installed ___________________________
The Type of Gas Your Fireplace Uses ____________________________________
Your Dealer's Name ________________________________________________
When ordering repair parts, always give the
following information:
. The model number of the appliance.
2. The serial number of the appliance.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the appliance.
WirinG diaGraMs
Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance
on a pullout panel located within the control compartment.
caution: LaBeL aLL Wires prior to disconnection WHen serVicinG controLs. WirinG errors can cause iMproper and dan-
Gerous appLiance operation.
interMittent eLectronic WirinG diaGraM
BroWn
BroWn
BLack
Battery
WaLL sWitcH Box
BLack (sensor)
BLack (iGnitor)
spark to piLot iGnitor
iGnitor ModuLe
3V
red
PILO T
IN
OUT
VENT
LO HI
TH TP
TH
TP
IN
oranGe (tHtp)
BLack (tp)
Green (tH)
LiMit
sWitcH
uMBiLicaL cord (9 Feet)