Linksys Tribox SPA400 User Manual

Page 3

Text mode
Original mode

Step 3 – Set the SPA400 to a Fixed IP address

Asterisk needs to access your SPA400, so it needs to be set to a
fixed ip address. To do this: -

Under Setup -> Basic Setup

• Select Fixed IP address and enter a valid fixed IP address for

your network.

• Be sure to enter a DNS server, if you do not know enter the

Telstra DNS server 139.130.4.5 – You can leave the secondary
blank

• Set your time zone.

• Click Save Settings

• Restart System

Sample Config – Use Address Valid For Your Network

Check with the network administrator if unsure.

Note the IP address in the Notes Section.