Life Fitness Platinum Club Series Treadmill - Manual (Page 10)

9
1.2 S
ETUP
Read the Operation Manual before setting up the Life Fitness Treadmill. Place the treadmill where it will be used before begin-
ning the setup procedure.
E LECTRICAL P OWER R EQUIREMENTS
The Life Fitness Treadmill requires a dedicated* line according to the elec-
trical configurations listed in the chart below.
* One individual branch circuit for each treadmill per NEC article 210-21 (b) (1) and 210-
23 (or other appropriate, country specific electrical compliance guidelines). The hot, neu-
tral and ground wires must each be routed independently (not looped or tied to other cir-
cuits.)".
NOTE: Do not modify the plug provided with this product. If the plug does
not fit into an available electrical outlet, have a proper outlet installed by a
qualified electrician.
G ROUNDING I NSTRUCTIONS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a path
of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equipment. Each
unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug
must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordi-
nances.
A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North America. If a
properly grounded, 20-amp outlet is not available, one must be installed by a qualified electrician. Models drawing
16 amps or more must be installed on a dedicated line.
IL EST ABSOLUMENT INTERDIT d'employer un adaptateur temporaire pour brancher cette fiche sur une prise
bipolaire en Amérique du Nord. Si aucune prise de 20 A correctement mise à la terre n'est disponible, en faire
installer une par un électricien qualifié. Les modèles utilisant 16 A ou plus doivent être branchés sur un circuit
spécialisé.
DANGER:
A risk of electrical shock may result from improper connection of the equipment-grounding
conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify the
plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified
electrician. Any modification to the electrical plug will result in a voided warranty.
DANGER:
Un branchement incorrect du conducteur de mise à la terre peut entraîner des risques de décharge
électrique. Consulter un électricien si des doutes subsistent quant à la technique de mise à la terre. NE PAS MODIFIER
la fiche fournie avec l'appareil. Si elle ne s'adapte pas à une prise, faire installer une prise correcte par un électricien
qualifié. Toute modification à la fiche annule la garantie.