Lennox Hearth INTER-TEL 8662 - Manual (Page 28)

Personalizing Your Endpoint
Page 14 Inter-Tel ® Model 8662 User Guide – Issue 12, October 2008
Programming DSS/BLF Buttons
You can use You can use programmable buttons as Direct Station Selection/Busy Lamp Field
(DSS/BLF) buttons. DSS/BLF buttons must be enabled by your system administrator.
After you program a DSS/BLF button, you can:
• Press the button to place a call to the assigned extension.
• Press the button and then hang up to transfer a call to the assigned extension. If the call is
transferred to voice mail you hear repeating double tones.
• Visually monitor the call activity of the assigned extension. The following lamp signals
indicate call activity.
To assign a DSS/BLF button:
1. With the handset on-hook, dial 397.
2. Press the programmable button, and then enter the extension number to be assigned to
the button.
Viewing Button Assignments
You can view programmable button (key) feature assignments.
To view button assignments:
1. With the handset on-hook, dial 396. PRESS THE KEY TO REVIEW appears.
2. Press any of the buttons to show the assignment.
3. Press # or (Speaker) to exit.
System Forward – On 30 352
System Forward – On and Off 30 354
System Speed Dial 22 381
Switch Keymap 15 399
Transfer To Hold 28 346
Transfer To Ring 28 345
View Programmable Button Assignments 14 396
Feature Page Code New Code
Lamp Signal Description
Continuously lit The extension is busy or off-hook.
Slowly flashing The extension is in Do-Not-Disturb (DND).
Quickly flashing The extension has a call ringing in.
Continuously flashing The extension is causing a “Station Off-Hook” system alarm.