Lexicon MC-1 - Manual (Page 20)

Lexicon
12
System
Configuration
20 100 1k 10k
(Hz)
(dB)
9.0000
7.0000
5.0000
3.0000
1.0000
-1.000
-3.000
-5.000
-7.000
-9.000
20k
Tilt
The Tilt parameter can be thought of as a straight line that pivots on a
fulcrum at 1kHz to correct the overall tonal balance of source material.
The range is -3.0dB to +3.0dB, referenced to the Treble level. This
control, adjustable in 0.2dB increments, is useful on many older
recordings, or when the desired tonal balance cannot be achieved at the
listening position. The Tilt control does not alter the tonal balance of the
rear or side speakers.
Loudness
A Loudness Contour parameter which boosts bass information, pro-
vides more balanced reproduction at low volume listening conditions.
Once you have calibrated MC-1 output levels, set the LOUDNESS
parameter ON to provide the ideal amount of boost for any given volume
setting. This parameter does not affect the sound of the rear or side
speakers.
Tilt Control Frequency Response
20 100 1k 10k
(Hz)
(dB)
5.0000
4.0000
3.0000
2.0000
1.0000
0.0
-1.000
-2.000
-3.000
-4.000
20k
Loudness vs MC-1 Volume control
(front left)
20 100 1k 10k
(Hz)
(dB)
0.0
-10.00
-20.00
-30.00
-40.00
-50.00
-60.00
-70.00
-80.00
20k
Bass Tone Control Frequency Response
20 100 1k 10k
(Hz)
(dB)
9.0000
7.0000
5.0000
3.0000
1.0000
-1.000
-3.000
-5.000
-7.000
-9.000
20k
Treble Tone Control Frequency
Response