Lindy 70582 User Manual
Page 2
PAGE 2
u
Description
The 70582 32Bit PCI bus Plug & Play 1P I/O card is equipped with one
ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. It includes
one 25 pin female connector for peripherals’ units with IEEE 1284 CENTRONICS
Parallel Interface.
u
Hardware Specification
Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO are 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36, and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface
Max. Speed: Up to 2MB/Sec
u
Hardware Installation
½
Turn off the power of your computer
½
Plug the 70582 Parallel Adapter into the PCI bus of your computer
½
Connect the peripheral Printer, Modem, Scanner… etc. to this adapter
½
Turn on the power of your computer
PCI device listing display (for example…)
!
!
Bus No Device No Func No Vendor ID Device ID
Device Class
IRQ
0 7 1 8086
7010
IDE
Controller
14
0 13 0 1409
7268
Simple
COMM.
Controller
10
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error
occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the
driver CD.
!!!!!!!
!!!!!!
!