Lucent Technologies 6 - Manual (Page 39)

Installing WinFax PRO 8.0
Issue 1 CRCS R6.0 April 1999 35
.
Figure 28. WinFax PRO Setup—Dialing Preferences
11. From WinFax PRO Setup - Dialing Preferences window, enter the fax and
phone information. If you need to dial a number to reach an outside line,
enter it in the Use prefix edit box. When complete, click Next.
12. From the WinFax PRO Setup - Modems window, select the modem that
you installed from the section Installing a Modem and click Next.
13. From the WinFax PRO Setup window, make sure that the modem is con-
nected and power is on then click Next. The program will check that your
modem is installed properly.
14. After the installer verifies your modem is working, click Next.
NOTE :
If you have a previous version of WinFax already installed, the installer will
notify you that it is installing over the previous version. Follow the instruc-
tions provided on screen.
15. From the WinFax PRO Setup - Install Microsoft Exchange window, CRCS
6.0 does not require Microsoft Exchange. Click Next.